How To Build A Round Bar Table Out Of Wood Pallets

How to Build a Round Bar Table Out of Wood Pallets

Are you looking for a fun and easy way to add a unique piece of furniture to your home? If so, then building a round bar table out of wood pallets is a great option. This project is perfect for beginners, and it can be completed in just a few hours. Here are the steps on how to do it:

### Materials

To build a round bar table out of wood pallets, you will need the following materials:

- 2 wood pallets - 1 sheet of plywood (3/4 inch thick) - Wood screws - Washers - Nails - Hammer - Drill - Jigsaw - Sander - Paint or stain (optional) ### Instructions #### 1. Prepare the pallets

Start by removing any nails or screws from the pallets. Then, sand the pallets to remove any splinters or rough edges.

#### 2. Cut the plywood

Cut the plywood into a circle using a jigsaw. The size of the circle will depend on the size of your table. Once you have cut the circle, sand the edges to make them smooth.

#### 3. Assemble the table

Place the plywood circle on top of one of the pallets. Center the plywood and secure it to the pallet using wood screws and washers. Then, flip the table over and attach the other pallet to the bottom of the plywood using wood screws and washers.

#### 4. Reinforce the table

To reinforce the table, add a few nails around the edges of the plywood. This will help to prevent the plywood from warping.

#### 5. Finish the table

If desired, you can paint or stain the table to match your décor. You can also add a clear coat of polyurethane to protect the finish.

### Tips

Here are a few tips for building a round bar table out of wood pallets:

- Use pallets that are in good condition. - If you are using old pallets, make sure to clean them thoroughly before using them. - Be sure to sand the pallets and plywood to remove any splinters or rough edges. - Use wood screws and washers to secure the plywood to the pallets. This will help to prevent the plywood from warping. - Add a few nails around the edges of the plywood to reinforce the table. - If desired, you can paint or stain the table to match your décor.