How To Build A Round Bar Table Out Of Wood Pallets For Free Plans

If you are looking for a fun and easy way to add some extra seating to your backyard or patio, building a round bar table out of wood pallets is a great option. This project is relatively inexpensive and can be completed in a weekend. Here is a step-by-step guide on how to build a round bar table out of wood pallets:

Materials you'll need:

Three wood pallets (48" x 40")
One piece of plywood (48" x 48")
Wood screws
Drill
Saw
Measuring tape
Level
Sandpaper
Paint or stain (optional)

Instructions:

Step 1: Cut the pallets to size. Cut each pallet in half lengthwise, resulting in six pieces that are 48" x 20".

Step 2: Assemble the base. Lay three of the cut pallet pieces side-by-side to form a square. Attach the pieces together using wood screws. Repeat this step to create a second square.

Step 3: Attach the squares to each other. Place the two squares on top of each other, offsetting them so that the corners of one square are in the center of the sides of the other square. Attach the squares together using wood screws.

Step 4: Cut the plywood. Cut the plywood into a 48" circle using a saw.

Step 5: Attach the plywood to the base. Place the plywood circle on top of the base and attach it using wood screws. Make sure that the plywood is centered on the base.

Step 6: Sand the table. Sand the table to remove any rough edges or splinters.

Step 7: Paint or stain the table (optional). If desired, paint or stain the table to match your outdoor décor.

Step 8: Enjoy your new bar table! Once the paint or stain has dried, your new bar table is ready to use. Enjoy it with friends and family!